How to DIY: How to Make an Acrylic Wall Lid from Paper in your Kitchen

You can now add the ability to decorate your kitchen cabinets, or your bedroom, or whatever else you may wish to decoratively decorate with a paper shelf.

And with this tutorial, you can make it in no time at all!

First, we’ll need to gather the materials needed to make this project.

Acrylic sheeting, fabric glue, and spray paint.

For our purposes, we want to start with Acrylic Sheeting, which can be found at most fabric stores.

You can also find it online for a good price.

For this tutorial we’ll be using this paper from Paper.

You will need a piece of Acrylic, a piece for the corner, and some paper.

Cut the Acrylic OutThe first thing we want for our corner is a thin piece of paper, around 8 inches in diameter.

The paper you cut will be your base for your corner.

For our corner, we will cut this piece of the Acrylline Paper that is about 8 inches across.

We’ll then cut the corner from the Acylline.

We will cut it straight to the corner.

Cut it again and cut the corners in the opposite direction, until you have your corner pieces cut out.

You can now use your circular saw to cut the Acylindrical Paper.

Now you will need to get a piece that is 1 inch thick.

You should have at least 8 inches of the material for this.

Now for the base of your corner piece.

You want this piece to be as thin as possible.

For this project, we are going to make a piece about 1 inch by 3 inches, but you can easily do it smaller.

We are going as wide as we can go, but keep the corner piece at the same length.

Cut it out and add a corner piece for your base.

Now we are ready to glue it together.

The glue you will use will depend on what you are making.

If you are doing a wall, you will want to use glue that has a higher melting point.

If your corner is going to be placed on a table, you want to try to use a glue that is not too hard to work with.

I use a super glue that I use on a regular basis, which is called Super Glue.

For the base, you need to make sure that it is glued to the Acriline Paper.

Then cut the piece of acrylic that is the center of your base, and the corner that is going down the side of your Acrylic Paper.

Now, you are going start to glue your Acrylindrical paper, as well.

Once your Acyalylindral Paper is glued together, you just need to use your square saw to make the corners.

Now, glue the Acrialleric Paper together.

You are now ready to decorating!

With this tutorial you will be able to decorat your kitchen cabinet, bedroom, and whatever else with a plastic shelf!

We hope you enjoyed this project!

Have you ever used an acrylic wall shelf?

What did you think?

Let us know in the comments!